English
简体中文
How to repair cracked wallpaper
Wallpaper is generally easy to crack in the joints, mainly due to the insufficient bonding ability of the viscose or the insufficient amount of glue used when pasting the wallpaper. Sometimes the worker does not leave enough room for improper operation, and the wallpaper will also appear after the thermal expansion and contraction. crack. The repair method is also very simple, just mix the wallpaper glue with water, apply it on the wall, then stick the wallpaper on it, and iron it with an iron after a few minutes. If there is a gap in the wallpaper splicing caused by thermal expansion and contraction, you can use a wet towel to soften the wallpaper and then iron it with an iron.
Repair steps for wall cracks:
1. Mix the wallpaper glue with water at a ratio of 1:1. The pure paper wallpaper does not need to be too viscous. If it is a PVC deep embossed wallpaper, it can be thickened;
2. Use an old toothbrush to clean up the warped edges, cracked wallpaper and dust on the wall;
3. Use a thinner object such as a small scraper or a blade to apply the glue on the wall, and the smearing area can be two-thirds;
4. Use a wet towel to soak and soften the upturned wallpaper and the surrounding 5cm, and then gently scrape the wallpaper flat with a scraper;
5. Wipe off the excess glue with a towel, and iron the wallpaper with an iron after a few minutes.
